Publications*

In preparation

  1. Danzi, F., Tao, H., Silva Salzar, C. E. and, Gibert J. M., “Oscillators with Programmable Stiffnesses through the Exploitation of Kirigami Patterns”. EXTREME MECHANICS LETTERS

Under review

  1. Danzi, F. and, Gibert J. M., “Frequency clustering and Disaggregation in Idealized Fractal Trees”. Preprint at: https://arxiv.org/abs/2201.12287

Journal papers

  1. Tao, H., Danzi, F., Silva Salzar, C. E. and, Gibert, J. M., “Heterogeneous Digital Stiffness Programming”. EXTREME MECHANICS LETTERS, Volume 55, DOI: 10.1016/j.eml.2022.101832

  2. Danzi, F., Tao, H. and, Gibert, J. M., "The Role of Topology on the Nonlinear Response of a V-shaped Resonator". NONLINEAR DYNAMICS. Volume 101, 24 August 2020, Pages 2027-2053, DOI: 10.1007/s11071-020-05789-y

  3. Danzi, F., Gibert, J. M., Frulla, G. and, Cestino, E., "Generalized Topology for Resonators having N Commensurate Harmonics". JOURNAL OF SOUND AND VIBRATION. Volume 419, 14 April 2018, Pages 585-603. DOI: 10.1016/j.jsv.2017.10.001

  4. Danzi, F., Frulla, G. and, Romeo, G., “An Invariant-based Performance-Oriented Procedure for Preliminary Design of Composite Structures”. AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, Volume 90, Issue 3, pp. 532-541, DOI: 10.1108/AEAT-11-2016-0228

  5. Danzi, F., Frulla, G. and, Cestino, E. “Constrained Combinatorial Optimization of Multi-layered Composite Structures by means of Stud GA with Proportionate Selection and Extinction”. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION. Volume 55, Issue 6, pp. 2239--2257, ISSN 1615-1488, DOI: 10.1007/s00158-016-1638-4

  6. Danzi, F., Gibert, J. M., Frulla, G. and, Cestino, E. “Graph-based Element Removal Method for Topology Synthesis of Beam based Ground Structures”. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION. Volume 57, Issue 4, pp. 1809--1813, ISSN 1615-1488, DOI: 10.1007/s00158-017-1818-x

  7. Cestino, E., Romeo, G., Piana, P. and, Danzi, F. “Numerical/experimental Evaluation of Buckling Behavior and Residual Tensile Strength of Composite Aerospace Structures after Low Velocity Impact”. AEROSPACE SCIENCE AND TECHNOLOGY. Volume 54, 2016, pp 1-9, ISSN 1270-9638, DOI: 10.1016/j.ast.2016.04.001

Conference papers

  1. Danzi, F., Tao, H., Joodaky, A., Gibert, J. M. “Nonlinear Dynamics of a Two Members Angle-Shaped Energy Harvester”. The 2022 ASME SMASIS Conference, 12-14 September Detroit, Michigan

  2. Danzi, F., Jenkins, J., Tao, H., Gibert, J. M. “Characterization of Nonlinear Kirigami Springs Through Transient Response”. The 2022 ASME IDETC Conference, 15-17 August, St. Louis, Missouri

  3. Danzi, F. and, Gibert J. M., “Nonlinear Dynamics Study of Tapered Resonators: Response to Primary and Secondary Resonance Excitation”, The 2019 ASME SMASIS - Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Louisville, Kentucky (KY), USA, 9-11 September 2019.

  4. Danzi, F., A. Joodaky and, Gibert, J. M., “Nonlinear Dynamic Analysis of 1:2 Internal Resonant V-shaped Harvester”. Proc. of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2019, Denver, Colorado (CO), USA, 4-8 March 2019, https://doi.org/10.1117/12.2517593.

  5. Danzi, F., Gibert, J. M., “Investigation of the Effect of the Folding Angle on an Internally Resonant V-shaped Harvester”, The 2018 ASME SMASIS - Conference on Smart Materials, Adaptive Structures and Intelligent Systems, San Antonio, Texas (TX), USA, 10-12 September 2018.

  6. Danzi, F., Cestino, E., Frulla, G. and Gibert, J. M., “Numerical and Experimental Validation of Unitized Beam Model”. Proc. of 31st Congress of the International Council of the Aeronautical Sciences, Belo Horizonte (Brazil), 9-14 September, 2018.

  7. Danzi, F. and, Gibert, J. M., “Exact Dynamics of an Angle-shaped Resonator for Energy Scavenging Applications”. Proc. of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2018, Denver, Colorado (CO), USA, 5-8 March 2018, https://doi.org/10.1117/12.2296642.

  8. Cestino, E., Frulla, G., Duella, R., Piana, P., Pennella, F. and, Danzi, F., “Application of Structural Topology Optimization to Couple Thin-Walled Stiffened Box-Beams”. SAE Technical paper, SAE 2017 AeroTech Congress & Exhibition, Fort Worth, Texas, (TX), USA, 26-28 September 2017.

  9. Danzi, F., Cestino, E., Frulla, G. and Gibert, J. M., “Equivalent Plate Model of Curvilinear Stiffened Panels”. Proc of 7th International Conference on Mechanics and Materials in Design, pp. 553-568, Albufeira (Portugal), 11-15 June 2017.

  10. Danzi, F., Frulla, G., Cestino, E. and Gibert, J. M., “MDO/MSO of Slender Thin Walled Box Beam Model”. Proc. of AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (2017). Denver, Colorado (CO), USA, 5-9 June 2017, https://doi.org/10.2514/6.2017-4323.

  11. Danzi, F., Gibert, J.M., Cestino, E. and Frulla, G., "Topology Synthesis of Planar Ground Structures for Energy Harvesting Applications", Proc. SPIE 10164, Active and Passive Smart Structures and Integrated Systems 2017, 101641L, Portland, Oregon (OR), USA, 11 April 2017. DOI: 10.1117/12.2257351.

  12. Frulla, G., Danzi, F. and, Romeo, G., ''Preliminary Design of Anisotropic Plate in Critical and Post-critical Regime by Extended Trace Procedure''. Proc. of 11th International Aerospace Supply Fair (AIRTEC), Munich (Germany), 25-27 October 2016.

  13. Romeo, G., Danzi, F. and, Cestino E., “Multi-objective Optimization of the Composite Wing Box of Solar Powered HALE UAV”. Proc. of 29th Congress of the International Council of the Aeronautical Sciences, St. Petersburg (Russia), 7-12 September, 2014.

  14. Romeo G., Danzi, F., Cestino E. and, Borello F., “Optimization of Advanced Composite Wing Box Structures Subjected to Combined Loads and Impact”. 1st International Conference on Engineering and Applied Sciences Optimization, Kos (Greece), 4-6 June 2014.

*For a detailed list of publications which includes invited talks, seminars and posters see my CV (Latest update March 1, 2022).